M2300

Technical Specification

Rated Power Bridge Mode 4Ω

1350 Watts @ 1KHz at < 0.1% T.H.D.

Rated Power (2 x 2Ω)

675 Watts per channel @ 1KHz at < 0.1% T.H.D. both channels driven

Rated Power (2 x 4Ω)

450 Watts per channel @ 1KHz at < 0.05% T.H.D. both channels driven

Rated Power (2 x 8Ω)

300 Watts per channel @ 1KHz at < 0.025% T.H.D. both channels driven

Rated Power (1 x 2Ω)

750 Watts @ 1KHz at < 0.1% T.H.D.

Power Bandwidth

10Hz - 30KHz ; 0, -3dB at rated 200 Watts 8Ω power

T.H.D. (2 x 2Ω)

< 0.1% @ 500 Watts per channel from 20Hz - 20KHz

T.H.D. (2 x 4Ω)

< 0.1% @ 350 Watts per channel from 20Hz - 20KHz

T.H.D. (2 x 8Ω)

< 0.1% @ 250 Watts per channel from 20Hz - 20KHz

Input CMRR

> -65dB @ 1KHz

Rated Power (1 x 4Ω)

500 Watts @ 1KHz at < 0.05% T.H.D.

Rated Power (1 x 8Ω)

330 Watts @ 1KHz at < 0.025% T.H.D.

Minimum Load Impedance

2Ω

Maximum RMS Voltage Swing

53 Volt

Frequency Response

10Hz - 100KHz ; +0, -3dB at 1 Watt

Phase Response

+5 to -15 from 20Hz to 20KHz

Input Impedance

10KΩ balanced

Cooling

Two temperature dependant variable speed 80 mm. high output DC fans

Controls

Two front panel attenuators, rear panel mode switch and gain select switch

Voltage Gain

0.775V, 32dB or 26dB

Crosstalk

> -60dB @ 1KHz at rated power @ 8Ω

Hum and Noise

> -105dB, "A" weighted referenced to rated power @ 8Ω

Slew Rate

> 30V/us

Dampling Factor (8Ω)

> 500:1 @ 20Hz - 1KHz

Indicator LEDs

2 clip, 2 signal presence, 1 active status, 2 protection

Protection

Thermal, DC, turn-on bursts, subsonic, incorrect loads

Connectors

XLR, speakon and binding post speaker output

Construction

16 ga. stell

Dimensions [HxWxD]

89 x 483 x 496 mm.

Net Weight

18 kg.

Gross Weight

21 kg.